Welcome to visit Hitiway’s website!
Call (832) 220-6537
MODULES
PSU-12 Smart Charging Module
Equipped with 12VDC battery to provide uninterrupted power supply for the system.
PSU-24 Smart Charging Module
Equipped with 24VDC battery to provide uninterrupted power supply for the system.
MV-10 Drive Module
Use with AP530.
MV30 Universal Delay Module
Delay time is adjustable。
MSM-23 Communication Module
For RS232 communication.
MSM-48 Communication Module
For RS485 communication.
MSM-485 Communication Module
RS485 communication for ML693, ML293, ML689+ and other products.
MV-001 Interface Module
Responsible for converting MOTO's MCAD module signal into Wiegand format.
M1245 Storage Module
The storage module can replace the HK1245.
MSM-TS Communication Conversion Module
Communication module conversion board.
Type A: Directly plug into ML293, ML693 series access control machine, complete the conversion from MN-100 module to access control machine.
Type B: Use with MSM-485 module to complete the conversion from MN-100 module to MRC series consumer POS machines.
Type C: Use with MSM-232 module to complete the conversion from MN-100 module to MC series controller.
Type D: Use with MSM-232 module to complete the conversion from MN-100 module to AAN-100 controller.
Type E: Used with MSM-485 module to complete the conversion from MN-100 module to MRC series consumer POS machines. Supports vlan (virtual private line network) divided by ports.
M1255 Storage Module
The storage module has a storage capacity of 512K. Currently used for ML293-4.
MV003-TTL Barcode Wiegand Conversion Module
The interface board is used to convert the data of the barcode scanner into Wiegand format output, and the output of the barcode scanner is TTL.
MSM-EPB-S Button Encryption Module
MSM-EPB-S and MSM-EPB-R button decoder are used together with access controller to encrypt (encode) the door open button signal to prevent illegal door opening by applying voltage in the line.
MSM-EPB-R Button Decryption Module
To use with access controller, MSM-EPB-R should be used together with MSM-EPB-S. According to different types of access control machines, up to four MSM-EPB-S can be connected at the same time. It is used to decrypt (decode) the door-opening button signal to prevent illegal door-opening by applying voltage in the line.
MP-011 Barcode Wiegand Conversion Module
Barcode scanning head conversion board.
MV004 Barcode Wiegand Conversion Module
The interface board receives the 12-bit barcode format and converts it into Wiegand format, and realizes the 98-bit Wiegand format output to the ticket gate.
MV905 Repeater
The signal booster on the RS485 bus realizes the relay of the RS485 four-wire or two-wire communication line and prolongs the communication distance.
MV-485A Converter
USB to RS485.
MV906 Wiegand Forwarding Module
Support Wiegand input and Wiegand output; multiple forwarding can be selected; forwarding interval can be set; Wiegand transformation is possible.
MV907 Wireless Communication Module
The WIFI wireless module can convert the network signal and the four-wire 485 signal to each other.
M1210 Centralized Storage
It can be installed on any bus of the Hitiway system to store the data uploaded by the local controller, as well as the events and other data stored in the MACAS3000 database. The maximum storage capacity can reach 10M Byte.
MV908 Wiegand Conversion Module
Convert Clock/Data format to Wiegand format. For example, it can be used in ML300 series with fishtail card reader ML491-10.
MSM-102 Signal Conversion Module
TCP/IP to 3.3V TTL.
MSM-TTL-232 Signal Conversion Module
Interchange between TTL and 232 signals.
MSM-1041 Wiegand Forwarding Module
Like the ML300A hardware, the program is different, which is used to improve the success rate of the access controller receiving the Wiegand card number sent by the card reader/fingerprint machine.
MN-100 Network Module
RS232 to TCP/IP, support TC and TS mode, support VLAN (virtual private line network). Available for IoT.